|
Heavy-Duty 1/2" Capacity Drill
Model No. 15 - Bench or floor models
- Five-step
V-belt pulley drive.
- Six-spline
alloy steel spindle with No. 33 Jacobs taper nose and 0-1/2" Jacobs
chuck.
- Full ball
bearing construction with four permanently lubricated and
sealed-for-life bearings including extra large bearing at spindle
nose.
- Large
slotted table that can be tilted or swiveled.
- Three-spoke
feed handle that provides full 4-1/2" feed travel.
- Clutch-type
quill spring adjusts return speed and tension and compensates for
tooling weight.
- Adjustable
motor bracket controls belt tension.
- Machines are
factory-assembled, factory-tested and shipped intact, ready for
immediate use.
Accessories and Standard Modifications
- Slow speed
attachment - provides five normal spindle speeds in addition to five
reduced spindle speeds at 4:1 reduction.
- Legs for
production bench models.
- No. 2 Morse
taper spindle nose adapter.
- Head only
and head, column & adapter.
Heavy-Duty 1" Capacity Drill
Model No. 18 - Standard or production-type bench or floor models
- Five-step
V-belt pulley drive.
- Six-spline
alloy steel spindle with No. 3 Morse taper nose.
- Full ball
bearing construction with four permanently lubricated and
sealed-for-life bearings including extra large double-row thrust bearing
at spindle nose.
- Large
slotted table that can be tilted or swiveled.
- Three-spoke
feed handle that provides full 5" feed travel.
- Clutch-type
quill spring adjusts return speed and tension and compensates for
tooling weight.
- Adjustable
motor bracket controls belt tension.
- Machines are
factory-assembled, factory-tested and shipped intact, ready for
immediate use.
Accessories and Standard Modifications
- Slow speed
attachment - provides five normal spindle speeds in addition to five
reduced spindle speeds at 4:1 reduction.
- Legs for
production bench models.
- No. 3 Jacobs
taper spindle.
- No. 3 Morse
taper to No. 2 Morse taper hardened reducing sleeve.
- 3/16" - 3/4"
Jacobs chuck and arbor.
- 1/8" - 5/8"
Jacobs chuck and arbor.
- Back spot
facer.
- Head only
and standard or production type head, column and adapter.
Rugged 1-1/2" Capacity Drill
Model No. 22 - Maintenance service production & job shop
applications in round column floor or pedestal models
- Four-step
"B" section V-belt pulley drive.
- Eight(8)
speeds - 65 rpm to 1350 rpm.
- Quick-shift
back gear lever.
- No. 4 Morse
taper, full ball bearing spindle with six driving splines.
- Single-piece
sliding head with 10" of travel.
- Power feed
providing feeds of .004 - .008 - .012 and .016" per revolution.
- 5-1/2"
diameter rigid column.
Accessories and Standard Modifications
- Feed handle
reverse tapping.
- Oversize
table for pedestal models.
- Table wear
plate with two T slots for pedestal models.
- Coolant
systems.
- Oil trough
table for round column models.
- 3/16" - 3/4"
Jacobs chuck and arbor.
- 0 - 1/2"
Jacobs chuck and arbor.
- Adjustable
work light hardwired to electrical.
Variable-Speed 2-1/2" Capacity Drill
Model 3B RPMster - The ultimate variable-speed production drill in
round column floor or pedestal models
- Variable
speed - instant speed change.
- Electric
tachometer for accurate spindle speeds.
- Automatic
power feed providing feeds of .006" - .010" - .014" and .018" per
revolution.
- No. 5 Morse
taper, full ball bearing spindle with six driving splines.
- Single
piece-sliding head with 8" of travel.
Accessories and Standard Modifications
- Feed handle
reverse tapping.
- Oversize
table for pedestal models.
- Table wear
plate with two T slots for pedestal models.
- Coolant
systems.
- Oil trough
table for round column models.
- 4:1 feed
reducer.
- 3/16" - 3/4"
Jacobs chuck and arbor.
- Adjustable
work light hardwired to electrical.
| 
